Power Amplifier

Ultra Fast Battery Chager for Nickel-Cadmium battery cells [NiCad] which will be discussed in this article is Fast NiCad Battery Charger, called the Ultra Fast Charger Battery Charger NiCad because it can make filling fast NiCad Batteries Cell. A battery charger in Desai has a fast charging capabilities such as Ultra Fast Battery Chager for Nickel-Cadmium battery cells [NiCad] on this article shall be equipped with some ability to protect the battery and charger circuit itself. Feature owned by Ultra Fast Battery Chager for Nickel-Cadmium battery cells [NiCad]  Autoshut-off, is the ability of the charger to stop charging current to a NiCad battery if the capacity NiCad battery is fully charged. Polarity Protection, with the existence of this capability so if there are mounting the battery on the charger upside yan can be known. Constant output voltage Output currents enough to fill some NiCad batteries at once in parallel. Short Circuit Protection, with the existence of this protec...

Nicad battery charger , this circuit just use transformer not  CT and  3 LEDs lamp. And its very very simple circuit charger . This circuit constant current LEDs to adjust charging current. It uses LEDs that pass a constant  current about 15 mA for an applied voltage range of 2 to 18 Volt. They can be paralleled to give any multiple of 15 mA and they light up when current is flowing. The circuit will charge single cell at 15 , 30 , or 45 mA , or cells in series up to the rated supply voltage limit about 14 Volt. See schematic below : Click to view larger

Battery Charger > In this my circuit , which is one of a series of simple battery charger , but this circuit to charger the Nicad battery . This circuit included with current and voltage limting . Why use it ?? because with current voltage you can choose voltage to charge a battery , and the limiting voltage use limit voltage if the battery is fully, because if battery fully that damaged quickly. See this schematic below : Click to view Enlarge Lamp 1 will glow brightly and the LED will be out when the battery is low or run out and the circuit is processing being to charged , but the LED will bright and the light dim when the battery is almost ready. Output voltage between 12 to 14 volt with current 100 mA.

Battery Charger This circuit can be charged the 12 nicad battery , and the circut charger at 75mA until  until the battery is fully , when the battery is fully the voltage to be down . This charge can charged fully in a hour , because the charge can't quickly charged , But the charge can stabilized output voltage. See this charger schematic below :