TA8210AH Stereo Car Power Amplifier

IC TA8210AH By using this you can apply a series of audio power amplifier is the car audio system. In general, all the speakers in the car using a subwoofer speaker, and woofer. Because the car is not big room so the sound is being required is not too high.

Audio amplifier circuit can work at a minimum voltage 12-volt DC, if supplied under voltage 12-volt amplifier work will be less than the maximum. This amplifier output power up to 200W or 2 x 100W stereo with 8 ohm impedance.



200W car amplifier schematic

Part List :

Resistor

R1 =1K

R2 =50K trim

R3 =1K

R4 =50K trim

R5 =680R

R6 =680R

R7 =150K

R8 =2R2

R9 =2R2

R10=2R2

R11=2R2



Capacitor

C1 =1uF

C2 =1uF

C3 =47uF

C4 =47uF

C5 =100n/400V

C6 =220uF

C7 =220uF

C8 =100n/400V

C9 =100n/400V

C10=100n/400V



Intregated Circuit

IC1=TA8210AH



Connector

X2-3=in R

X2-2=gnd

X2-1=in L

X1-1,X1-2=Out R

X1-3,X1-4=Out L

Comments

  1. Replies
    1. it's 2.2ohms !! you will see 2k2 Ohms and 2M2 Ohms. They mean 2,200 Ohms and 2,200,000 Ohms, this system reduces the chances of missing the decimal point --- in circuit design and construction, it is a disaster to use a resistor that is 67 Ohms when a 6.7 Ohm resistor is needed.

      Delete
  2. have you try this circuit ?
    does it really a 200watts amplifier?

    ReplyDelete
  3. Pout (1) = 22W / Channel (Vcc = 14,4V, f=1kHz, THD = 10%, Rl = 4 Ohm)
    Pout (2) =19W / Channel (Vcc = 13,2V , f=1kHz, THD = 10%, Rl = 4 Ohm)

    ReplyDelete
  4. I made this and use it few times.
    real wattage is 18W per channel

    ReplyDelete
  5. yes its real wattage but the circuit upgrade its

    ReplyDelete

Post a Comment

Popular posts from this blog

1500W Stereo Power Amplifier Schematic

TDA2030 complete tone control